|
|
|
>>Top |
Trillers |
|
Our range of disc
plough is mounted directly to the tractors. Plough being a
hydraulically operated basic implement for the preparation
of land, is available in a basic 2 furrow and 3 furrow
version with the kit for converting it to 3 furrow. The
heavy-duty pipe frame has high trash clearance which allows
the plough to operate under heavy crop residual. Being fully
mounted and comparatively lighter in weight results lighter
draft as compared to equivalent trailed plough where more
power is required to operate and consequently higher
operating costs. Our range of disc plough is useful in hard
dry trashy, stumpy land conditions and in soils where
scouring is a major problem. |
|
|
|
|
|
|
|
>>Top |
|
|
|
Our range of ESES levelers is a
simple and rugged implement used to directly fit to the tractors.
The 6mm single plate body duly reinforced leveler assists in smooth
operation. A hydraulically operated basic implement. Our range of
leveler are used in the preparation of land. Made of special steel.
Our leveling blades are most sought after product in the agricultural
market. These blades having cross sections which increase their life. The range of levelers
are available in the width of 6" to
8". |
|
|
|
|
|
|
>>Top |
|
|
We offer our clients Single Furrow Cutting
Type ESES plough which is basically used as an agricultural
implement. |
|
|
|
|
|
|
|
>>Top |
|
|
|
'Mounted Medium Duty Offset Disc Harrow' when
mounted on a tractor, becomes a compact unit that can easily be
maneuvered into corners or on short head lands. In addition, the
implement being easily attached and transportable in top speeds,
little time is lost between the shed and the field. The spring
loaded head stock brace of the mounted harrow allows flexibility of
the unit over uneven terrain or where obstructions are likely to be
met. This feature prevents damage. |
|
|
|
|
|
|
>>Top |
|
|
We have put fourth unparalleled range
of pipe support tiller which is complex in design and are more
durable and productive. It has longer frame to facilitate wide
spacing tines. Heavy pipe supported by four plates is fixed on the
main frame of enforcing against bending stains. Our range of pipe
support tiller are widely used by the formers of medium and heavy
soil. |
|
|
|
|
|
|
|
|
|
|
>>Top |
|
|
|
Rotary Tiller is better than conventional
tillage equipments because it saves time, fuel, soil compaction &
wear and tear of the tractor as it accomplishes better pulverization
in shortest time. It leaves the worked soil perfectly leveled .
Stubbles & residues of previous crop are chopped into pieces and
thoroughly mixed in soil to form organic manure. No need for
multiple operations of cultivator, disc harrow and plank. Puddling
in wet fields is done smoothly, quickly & efficiently. Sealed
bearings prevent moisture/mud entry, resulting in longer bearing
protection. |
|
|
|
|
|
|
>>Top |
|
|
'Rotary Slasher has heavy duty gear boxes and
rugged frame which can withstand rough and tough wild grass,
anchored straw and bushes. |
|
|
|
|
|
|
|
>>Top |
|
|
|
We offer a range of spring loaded tiller which
has 7, 9, 11 or more tines. These tines are mounted in two rows one
behind the other at center distance of 9". We have mounted each tine
with two strong coil spring that allows the tine to ride over
obstructions in the soil without the inconvenience of stopping the
work. This specific property of our spring loaded tiller makes it
suitable for stone and root obstructed soil. Fitted with 2.5"
reversible shovels, these tillers are highly efficient. Special
steel forged tines and high tensile bolts are also used. Made from
special steel duly hardened and tempered, our range of tillers is
light in weight and extremely hard. Our tillers loosen the soil to a
depth of nine inches and eliminate the use of the plough. Thus they
are used in the preparation of seed bed quickly and economically. |
|
|
|
|
|
|
'coming soon........ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
>>Top |
Harrow
Disc |
|
Agricultural Discs
manufactured by us are available in different sizes, ranging from
diameter 8 inches to 26 inches with change in concavity and
thickness. They have different types of center holes,
according to the user's need and specification. These are
sprayed with a protective material, so as to protect them from
damage.
PLAIN DISC: Repeated use of
land for cultivation causes upper layer of soil to lose its
nutrients viz. Nitrogen, Phosphorus, Sulphur, etc. so
agricultural harrow discs with plain discs are used for
ploughing of soil, which turns outer layer of soil inside
and extracts inner fine & fertile soil making growth of
crops easier.
NOTCHED DISC: A notched disc
(also known as cut-way or scallop disc) is
used to make soil finer. It crushes the soil
making it smooth and ready for cultivation.
FLAT DISC / COULTER: These are
flat discs that are used for sowing of
seeds. Wherever they travel, a trailing cut
is made where seeds are sown |
|
>>Top |
|
|
|
|
|
|
Tines and Blades |
|
|
|
>>Top |
|
Scarfier Tine with
Tip:
Scarfier tine is made of Spring steel EN45 material. Hardness of
Scarfier tine is 40-45 HRC. 3 different types are available.
Size 2- 1/2” x 5/8”
Weeder Tine:
Weeder tines are made of Spring steel material EN45.
Size is 1”
x 1/8. Hardness 40 -45 HRC
|
|
|
|
|
|
|
|
|
|
>>Top |
|
|
|
|
Made from Spring steel Finish:Black Painted or any Other colour as per customer requirment Hardened and Tempered
The size is 1-3/4” x 3/8”
|
|
|
|
|
|
>>Top |
|
|
Made from Spring Steel-En-45 Finish: Black Painted or any Other
colour as per customer requirement Hardened and Tempered
|
|
|
|
|
|
|
|
>>Top |
|
|
|
Made from Spring Steel-En-45
Finish:Black Painted or any Other
colour as per customer requirement Hardened and Tempered
|
|
|
|
|
|
|
>>Top |
|
|
Made from Spring Steel-En-45
Finish:Black Painted or any Other
colour as per customer requirement Hardened and Tempered
|
|
|
|
|
|
|
|
>>Top |
|
|
|
|
Point of Plough is used
for dry and hard land. It is made of rigid metal and due to that
it will not bend or deform and it works properly. A preventive
coating is done on it so as to prevent it from the rust. These
are available in different sizes as per user’s requirement. |
|
|
|
|
|
|
|
>>Top |
Fingers |
The fingers are
available in different size as per customer requirement. They are
mainly forged out of very rigged material (Carbon steel) suitable for
working in dry and hard land. Prevention coating is done (Stovel Paint, Powder coating) to prevent
from rust. |
|
|
>>Top |
Harvester Blades |
|
|
|
|
|
|
|
|
Blade Big |
Blade for Cutter
Bar1 |
detuz |
|
|
|
|
|
|
|
|
|
|
|
|
Blade for Double |
Blade for Finger |
Blade for Finger1 |
|
|
|
|
|
|
|
|
|
|
|
|
Blade for Rotary
M. |
Blade for Rotary
M.1 |
cutter-bar |
|
|
|
|
|
>>Top |
|
|
>>Top |
Rasp Baar |
|
|
|
|
|
|
class-rasp-bar1 |
class-rasp-bar |
|
|
|
|
|
|
|
|
|
|
flat-raspbar |
jonderea |
|
|
|
|
>>Top |
|
|
|
|
|
>>Top |
Spacer Reed Casting |
|
>>Top |
|
>>Top |
Fastners |
|
|
|
|
|
>>Top |
|
|
|
|
Shaft Components |
|
We manufacture
a diverse range of PTO
shafts spare parts that have gained huge
appreciation for their reliable
performance. Our range of spare parts
comprise of the following:
- 6 Spline
yoke
- 21 spline
yoke
- Outer tube
yoke
- Inner tube
yoke
- Outer tube
- Inner tube
- Cross
journel
- S. B. yoke
- Hub
|
|
|
|
|
|
|
|
>>Top |
|
|
|
|
|
The splines yoke we offer are reckoned for
their high performance and durability. These are extensively used in
tractors. We make sure that these are manufactured using premium
grade raw material.
|
|
|
|
|
>>Top |
|
|
|
|
|
Our spectrum of tractor side yoke are
manufactured from qualitative raw material, and are accurately
machined.
|
|
|
|
|
>>Top |
|
|
|
|
|
|